Sign in to follow this  
Followers 0
oldmatechoc

Chernarus Redux Environment

1 post in this topic

To stop client side errors and fix health being restored on relog.

Just add ChernarusRedux to your mission config under CfgExileEnvironment

E.g

Spoiler

//	Original from
//	https://github.com/kuplion/Exile-Chernarus

class CfgExileEnvironment 
{
		class ChernarusRedux
	{
		class FireFlies
		{
			// 1 = enabled, 0 = disabled
			enable = 1;

			// At this hour fire flies begin to spawn
			startHour = 18;

			// At this hour fire flies stop spawning
			endHour = 6;
		};

		class Anomalies
		{
			// 1 = enabled, 0 = disabled
			enable = 0;

			// At this hour anomalies begin to spawn
			startHour = 19;

			// At this hour anomalies stop spawning
			endHour = 6;
		};

		class Breathing
		{
			// 1 = enabled, 0 = disabled
			enable = 0;
		};

		class Snow
		{
			// 1 = enabled, 0 = disabled
			enable = 0;

			// https://community.bistudio.com/wiki/surfaceType
			surfaces[] = {};
		};

		class Radiation 
		{
			// 1 = enabled, 0 = disabled
			enable = 0;

			/*
				Defines contaminated zones in a specific map. 
				You can define multiple zones per map. The format
				of the zones is:

				[Position ASL(!), Full Radiation Radius, Maximum Radius]

				The radius works as follows:

	            |-------------------------------------------------------|
	                                Maximum Radius
				
				|------------------------|
				  Full Radiation Radius   

				Within the full radiation radius, radiation factor is
				always at a maximum. Outside of this, it lowers down
				to no radiation smoothly.

				Radiation:

	            |------------------------|------------------------------|
	            1        1      1        1     0.75    0.5     0.25    0
			*/
			contaminatedZones[] = {};
		};

		class Temperature
		{
			// Temperature in °C for the time of day, per hour
			// Add the first index to the last index, so it is 25 indizes!
			daytimeTemperature[] = {10.93,11.89,13.42,15.40,17.68,20.10,22.48,24.63,26.40,27.66,28.32,28.80,28.80,28.32,27.66,26.40,24.63,22.48,20.10,17.68,15.40,13.42,11.89,10.93,10.93};
		
			// Temperature change in °C when it is 100% overcast
			overcast = -2;

			// Temperature change in °C when it is 100% raining
			rain = -5;

			// Temperature change in °C when it is 100% windy
			wind = -1;

			// Temperature change per 100m altitude in °C
			altitude = -0.5;

			// Difference from the daytime temperature to the water temperature
			water = -5;
		};
	};
	class Chernarus 
	{
		class FireFlies
		{
			// 1 = enabled, 0 = disabled
			enable = 1;

			// At this hour fire flies begin to spawn
			startHour = 18;

			// At this hour fire flies stop spawning
			endHour = 6;
		};

		class Anomalies
		{
			// 1 = enabled, 0 = disabled
			enable = 0;

			// At this hour anomalies begin to spawn
			startHour = 19;

			// At this hour anomalies stop spawning
			endHour = 6;
		};

		class Breathing
		{
			// 1 = enabled, 0 = disabled
			enable = 0;
		};

		class Snow
		{
			// 1 = enabled, 0 = disabled
			enable = 0;

			// https://community.bistudio.com/wiki/surfaceType
			surfaces[] = {};
		};

		class Radiation 
		{
			// 1 = enabled, 0 = disabled
			enable = 0;

			/*
				Defines contaminated zones in a specific map. 
				You can define multiple zones per map. The format
				of the zones is:

				[Position ASL(!), Full Radiation Radius, Maximum Radius]

				The radius works as follows:

	            |-------------------------------------------------------|
	                                Maximum Radius
				
				|------------------------|
				  Full Radiation Radius   

				Within the full radiation radius, radiation factor is
				always at a maximum. Outside of this, it lowers down
				to no radiation smoothly.

				Radiation:

	            |------------------------|------------------------------|
	            1        1      1        1     0.75    0.5     0.25    0
			*/
			contaminatedZones[] = {};
		};

		class Temperature
		{
			// Temperature in °C for the time of day, per hour
			// Add the first index to the last index, so it is 25 indizes!
			daytimeTemperature[] = {10.93,11.89,13.42,15.40,17.68,20.10,22.48,24.63,26.40,27.66,28.32,28.80,28.80,28.32,27.66,26.40,24.63,22.48,20.10,17.68,15.40,13.42,11.89,10.93,10.93};
		
			// Temperature change in °C when it is 100% overcast
			overcast = -2;

			// Temperature change in °C when it is 100% raining
			rain = -5;

			// Temperature change in °C when it is 100% windy
			wind = -1;

			// Temperature change per 100m altitude in °C
			altitude = -0.5;

			// Difference from the daytime temperature to the water temperature
			water = -5;
		};
	};
};

 

 

Edited by oldmatechoc
2 people like this

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.